Back to Blog
Product Reviews 2026-11-15 Excel Blades: Precision Cutting Tools & Craft Knives 8 views

What Is a #50 Drill Bit Used For? Micro Drilling Basics

What Is a #50 Drill Bit Used For? Micro Drilling Basics

A #50 drill bit measures 0.0370 in (0.940 mm) and suits fine work in wood, resin, acrylic, PVC, and jewelry. Here’s what it drills and which Excel tools it fits.

What is a #50 drill bit used for?

What is a #50 drill bit used for?
A #50 drill bit is a micro twist bit for drilling very small holes in wood, resin, acrylic, PVC, jewelry, beads, and similar materials. The Excel Blades #50 set is aimed at model making, RC car detailing, beadwork, and intricate DIY tasks.
What size is a #50 drill bit?
The Excel Blades #50 bits measure 0.0370 inches (0.940 mm) in diameter. That is the defining measurement for this number size; other #50 bits should match that nominal size, but always confirm the specification on the bit you buy.
Which Excel drills are compatible with #50 bits?
The supplied record lists compatibility with Excel drill models 70003, 70005, 70011, 70023, and 55661. If you own a different rotary tool or pin vise, check its chuck or collet range before assuming a fit.
How many bits come in the set?
The Excel Blades #50 Drill Bits set includes twelve bits packaged in a durable plastic tube for storage and access.
What material are the bits made of?
The bits are made from carbon steel and coated with a light rust-resistant oil layer. The record does not specify a recommended cleaning or re-oiling schedule, so follow the storage guidance that comes with your tool.
Can I use a #50 bit in a Dremel or other rotary tool?
The supplied information only confirms compatibility with the five Excel drill models listed above. It does not confirm fit for Dremel or other brands, so check the collet size on your tool before buying.
Is there a safety warning for these bits?
The record includes a California Prop 65 warning for dust: cancer. That warning applies to dust generated by drilling, so take appropriate dust-control measures for your material and workspace.

How the #50 size fits into number drill bits

Number drill bits are sized by a gauge number rather than by fractional inch or millimeter labels. The #50 sits in the finer end of that range, which is why it is often grouped with micro drill bits for modeling, jewelry, and electronics work. The important number to remember is the actual diameter: 0.0370 in (0.940 mm).

That size is small enough for delicate holes but still large enough to accept fine wire, pins, or beading thread in many craft projects. If your project calls for a hole in that range, a #50 is the direct match. If you need a different diameter, choose the number size that corresponds to your measurement rather than forcing a #50 to do a job it was not sized for.

Excel Blades #50 Drill Bits at a glance

  • Drills #50: Bit size: 0.0370 in (0.940 mm). This is the core specification for matching the bit to your hole size and material.
    Drills #50
    Drills #50
  • Drills #50: 12-piece set packaged in a durable plastic tube. Twelve bits give you spares for repeated fine work, and the tube keeps the small bits together.
  • Drills #50: Compatible with Excel drill models 70003, 70005, 70011, 70023, and 55661. Check this list first if you already own an Excel drill and want to avoid a mismatch.
  • Drills #50: Made from carbon steel with a light rust-resistant oil coating. The coating is a storage consideration; keep the bits in the tube and follow the maker’s guidance for keeping them dry.

Matching the #50 bit to your material

The supplied record lists wood, resin, acrylic, PVC, jewelry, beads, and similar craft materials as suitable for these bits. That breadth is useful for mixed-media makers who move between model parts, custom jewelry, and plastic components without changing tools.

For any material, start with a scrap piece to confirm the bit tracks where you want it. Very small bits are sensitive to sideways pressure, so let the bit do the cutting and keep the drill straight. The record does not include a recommended spindle speed or feed rate, so use the setting your drill’s manual specifies for the material you are working.

What the record does not confirm

The supplied information does not state a recommended drilling speed, feed pressure, or maximum material thickness. It also does not confirm compatibility with pin vises, Dremel tools, or drill brands other than the Excel models listed. If you need those details, check the tool manufacturer’s documentation or test the bit in a hidden area before committing to a visible hole.

The record also does not describe a cleaning or re-oiling routine beyond the factory rust-resistant coating. Treat the storage tube as the first line of protection and keep the bits away from moisture between sessions.

Related Articles

Customer Service
Home
Products
Cart
Profile