Start with the end that matches your material
The Excel Blades Double Ended Tool 30610 puts a #11 blade on one side and a replaceable-tip stylus on the other. That split is the whole point: you cut or trim with the knife end, then flip the tool to emboss, score, or shape with the stylus end. Before you pick a tip, decide whether your next move removes material (knife) or presses a line into it (stylus).
The record lists the tool for paper embossing, leather scoring, book binding, fondant shaping, clay molding, model making, and pumpkin carving. It also lists cutting foam core, plastic, wood, cloth, and film on the knife side. Treat those as the supported starting points, not a guarantee for every thickness or brand of material.
What the 30610 actually includes
- Double Ended Knife, Stylus and Embossing Tool: Double-ended design: K1 aluminum handle with a #11 blade on one end and a stylus that accepts replaceable tips on the other. You can move between cutting and embossing without setting down a separate tool, which helps on small paper and model projects.

Double Ended Knife, Stylus and Embossing Tool - Double Ended Knife, Stylus and Embossing Tool: Includes four tips: one 0.0625 embossing tip, two 0.125 embossing tips, and one 0.058" needle point. The tip you choose changes the width of the line or impression, so matching tip to task is the main skill to learn.
- Double Ended Knife, Stylus and Embossing Tool: Knife side fits #5, #6, #10, #11, #21, #12, #13, #16, #17, and #17A blades. If you already own Excel Blades blades in those sizes, you can swap the #11 for another shape without buying a second handle.
- Double Ended Knife, Stylus and Embossing Tool: Includes a shatter-resistant safety cap and is made in the USA. The cap protects the blade end between cuts; the origin note is useful if you prefer domestically made tools.
How to use an embossing stylus on paper
Paper embossing with this tool is a pressure-and-repeat process. The record names paper embossing as a supported use but does not supply step-by-step instructions, so the following is a practical starting method rather than a manufacturer procedure.
- Choose a tip width: Use the 0.125 tip for a broader, softer impression and the 0.0625 tip for finer lines. The 0.058" needle point is the finest option in the set and suits detail work where a narrow line matters.
- Work on a forgiving surface: Place the paper on a slightly padded surface so the tip can press without tearing. The record does not specify a pad, so test on scrap first.
- Trace with light, even pressure: Draw the stylus along your line in one direction, then repeat if you want a deeper impression. Consistent pressure matters more than force.
- Check the back side: Flip the paper to see whether the embossed line reads clearly. If it is faint, add another pass rather than pressing harder and risking a tear.
Matching the four tips to the job
- 0.125 embossing tip (two included): The wider option for broad embossed lines, scoring leather, and shaping fondant or clay where a rounded impression is wanted.
- 0.0625 embossing tip: A middle width for paper embossing and book-binding work where the line should be visible but not heavy.
- 0.058" needle point: The finest tip in the set, suited to detail embossing and tight model-making work. Keep pressure light because the point concentrates force.
Scoring leather and book-binding work
The record lists scoring of leather and book binding as stylus-side uses. Scoring means pressing a guide line into the material rather than cutting through it. Use the wider 0.125 tip for a crease that will fold, and the finer tips when you need a narrow registration line. Test on an offcut first: leather and board vary in firmness, and the record does not give a recommended pressure or number of passes.
For book binding, the stylus is useful for creasing fold lines and pressing seams before gluing. Keep the knife end capped while you work the stylus so the blade is not exposed near your hands.
Using the knife end for trimming and model making
The knife side comes with a #11 blade, the standard pointed shape for trimming paper, stripping, and model making. The record also lists foam core, plastic, wood, cloth, and film as knife-side materials. Because the handle accepts #5, #6, #10, #11, #21, #12, #13, #16, #17, and #17A blades, you can change to a different blade profile for heavier or more delicate cuts.
The record does not include cutting-depth guidance or a recommended number of passes. A safe habit is to make several light passes rather than forcing the blade through thick material, and to recap the knife end whenever you switch to the stylus.
Switching between ends without losing your place
The two ends share one handle, so the practical workflow is to finish all knife cuts for a step, cap the blade, then flip to the stylus for embossing or scoring. On a paper project, cut the outline first, then emboss the decorative lines. On leather or book board, score the fold lines before trimming to size so the knife follows an established line.
The record confirms replaceable tips on the stylus side but does not describe a tip-removal procedure. If a tip feels loose or stuck, check the supplied packaging or the manufacturer's guidance rather than forcing it.
Safety and material limits to know before you start
The product record carries a California Prop 65 warning for lead and cancer risk, with a link to p65warnings.ca.gov. Read that warning before ordering, especially if the tool will be used by children or handled frequently. The record does not identify which component contains lead, so treat the warning as a reason to wash hands after use and keep the tool away from food contact.
The shatter-resistant safety cap protects the knife end in storage, but the record does not state that the cap is child-resistant. Store the tool capped and out of reach. The record also does not confirm suitability for food-safe use, even though fondant shaping is listed as a use; if you work with fondant, keep a dedicated tool for craft materials and a separate one for food.

