Torna al blog
Guide pratiche 2026-11-17 Excel Blades: Precision Cutting Tools & Craft Knives 9 visualizzazioni

How to Use a 20 Assorted Drills Index for Hobby Projects

How to Use a 20 Assorted Drills Index for Hobby Projects

A step-by-step guide to using the Excel Blades 20-piece drill index (#61–#80) for jewelry, models, and crafts, from choosing a bit to storing it safely.

Start with the hole you need to make

A 20-piece drill index is not a collection of random bits; it is a size range that lets you match the drill to the material and the hole. The Excel Blades 20-Piece Fine High-Speed Steel Drill Bit Set covers sizes #61 through #80, which are small bits suited to jewelry, models, and detailed craft work. Before you pick a bit, decide what the hole is for: a bead, a resin piece, a model part, or a jewelry component. That decision tells you which end of the range you need and how much control the job requires.

What the 20-piece index actually gives you

The set includes 20 high-speed steel drills in a continuous range from #61 to #80. The bits are organized in a durable case pack, so you can see the sizes and keep them protected between projects. The record lists wood, various resins, delicate jewelry components, dense walnut, natural amber, beeswax, olive nut, small beads, PVC, acrylic, and other plastics as materials for clean, accurate holes. It does not provide recommended drill speeds, feed pressure, or a size-to-material chart, so treat the bit choice as a starting point and test on scrap first.

The Excel Blades 20-piece drill index at a glance

  • 20 Assorted Drills Index: 20 fine high-speed steel drills ranging from #61 to #80, organized in a durable case pack. A continuous small-size range lets you step up gradually instead of forcing one bit to do every job.
    20 Assorted Drills Index
    20 Assorted Drills Index
  • 20 Assorted Drills Index: The set is intended for precision drilling in wood, resin, plastic, and jewelry, including beads, amber, beeswax, and olive nut. These are the materials the record supports, so you can plan hobby work around them rather than guessing.

A supported way to drill a small hole with the index

The product record does not include a full operating procedure, so the steps below stick to what the evidence supports: choose a bit from the #61–#80 range, secure the work, drill a test hole, and store the bit back in the case. Where the record is silent, the step is marked as a checkpoint rather than a manufacturer instruction.

  1. 1. Match the bit to the material and the hole: Use the #61–#80 range for the light materials named in the record: wood, resin, plastic, jewelry components, beads, amber, beeswax, and olive nut. Start with the smallest bit that could produce the hole you need, then step up if the hole must be larger.
  2. 2. Secure the workpiece before drilling: The record does not specify a holding method. What it does confirm is that the set is for delicate drilling tasks, so support the piece so it cannot shift while the bit turns.
  3. 3. Drill a test hole in scrap: Because the record gives no speed or pressure settings, make a test hole in the same material before working on the final piece. Check that the bit cuts cleanly and that the hole size suits your bead, wire, or model part.
  4. 4. Return each bit to the index case: The case pack is described as a secure storage solution that keeps the fine drills safe from damage and organized for the next project. Put the bit back as soon as you finish so the set stays complete.

Choosing among the small drill bit sizes

The #61–#80 range is narrow by design. If your work is jewelry, beads, or fine model details, the whole set is useful because you can move between sizes without buying a second index. If you routinely drill larger holes, this index will not replace a general drill set; it covers the small end. The record does not assign specific sizes to specific materials, so use the test-hole step to confirm the fit rather than relying on a size chart that is not supplied.

Hand drilling vs. a powered rotary tool

The record does not name a compatible holder or specify whether the bits are intended for hand drilling or a rotary tool. It does describe the set as suitable for precision drilling and delicate tasks. That makes a controlled setup important, but the choice of holder is yours to make based on the tool you already own.

  • Hand drilling with a pin vise: A pin vise gives slow, controlled rotation, which suits beads, amber, and small jewelry parts where a slip would damage the work. The record does not confirm shank compatibility, so check that your holder accepts the bit before relying on it.
  • Powered rotary tool: A rotary tool can speed up repetitive holes, but the record gives no speed settings. Use the test hole to find a controlled setting, and keep the bit straight to avoid snapping these fine sizes.

Drill bit index storage that keeps the set usable

The case pack is the storage system included with the set. Because the bits are fine, returning each one to its labeled slot after use is the simplest way to prevent mix-ups and damage. The record does not describe cleaning, oiling, or replacement-bit options, so keep storage simple: close the case when the set is not in use and keep it away from loose tools that could crush the small drills.

When the 20-piece index is the right buy

Choose this set when your work centers on small holes in wood, resin, plastic, jewelry components, beads, amber, beeswax, or olive nut, and when you want the sizes organized in one case. If your projects need larger holes or the record’s material list does not match your work, a different bit range will serve you better. The index is a focused tool for detailed hobby drilling, not a universal drill set.

Articoli correlati

Customer Service
Home
Prodotti
Carrello
Profilo