Back to Blog
Comparisons 2026-11-15 Excel Blades: Precision Cutting Tools & Craft Knives 2 views

Drills #76 vs #71: Which Micro Drill Size Do You Need?

Drills #76 vs #71: Which Micro Drill Size Do You Need?

Compare Excel Blades #76 and #71 micro drill bits by size, materials, and pin vise compatibility to choose the right bit for models, jewelry, and fine detail work.

The size gap that decides most projects

The main difference between the Excel Blades #76 and #71 micro drill bits is diameter: #76 measures 0.457 mm (0.018 in), while #71 measures 0.660 mm (0.0260 in). That gap affects the hole you create and the bit's stiffness in delicate work. Both are high-speed steel bits sold in 12-piece sets with a protective plastic tube, and both fit the same Excel pin vises (70003, 70005, 70011, 70023, and 55661).

Your choice comes down to the hole size your project needs and the material you're drilling. The #76 suits extremely fine holes, while the #71 offers a slightly larger diameter that may be more forgiving in soft materials. The records do not include a recommended material thickness or drill speed, so plan to test on scrap first.

#76 vs #71 at a glance

  • Drill size: #76: 0.457 mm (0.018 in); #71: 0.660 mm (0.0260 in).
  • Pack quantity: Both come as 12-piece sets in a protective plastic tube.
  • Material: Both are made from high-speed steel.
  • Pin vise compatibility: Both list compatibility with Excel pin vises 70003, 70005, 70011, 70023, and 55661.
  • Listed materials: #76: wood, resin, acrylic, plastic, beads, walnut, amber, and PVC. #71: wood, plastic, acrylic, resin, PVC, beads, and other soft materials.
  • Prop 65 warning: Both carry a California Prop 65 warning for dust (cancer).

What the #76 record confirms

  • Drills #76: Excel Blades #76 High-Speed Twist Drill Bits, 12-Pack, Precision Micro Drills, size 0.457 mm (0.018 in). The smaller diameter is the key spec for ultra-fine holes in jewelry, models, and detailed craft work.
    Drills #76
    Drills #76
  • Drills #76: Ideal for wood, resin, acrylic, plastic, beads, walnut, amber, and PVC. Confirms the materials the manufacturer lists for this bit, so you can match it to your project.
  • Drills #76: Compatible with Excel Pin Vises 70003, 70005, 70011, 70023, and 55661. Ensures the bit fits your existing pin vise if you own one of these models.

What the #71 record confirms

  • Drills #71: Each #71 drill bit measures 0.0260 inches (0.660 mm). The larger diameter creates a visibly bigger hole than #76 and may suit slightly heavier work.
    Drills #71
    Drills #71
  • Drills #71: Designed to drill through wood, plastic, acrylic, resin, PVC, beads, and other soft materials with minimal effort and maximum accuracy. Lists the materials the manufacturer supports for this bit, helping you avoid unsuited applications.
  • Drills #71: Compatible with a variety of hand drills, rotary tools, and pin vises including models 70003, 70005, 70011, 70023, and 55661. Shows the bit fits common rotary tools and the same pin vises as the #76, so you can use either bit with your existing setup.

When the #76 is the better choice

Choose the #76 when your project demands the smallest practical hole and the material is relatively soft. The record lists wood, resin, acrylic, plastic, beads, walnut, amber, and PVC, making it a fit for jewelry making, model crafting, and intricate DIY work. Because the bit is extremely fine, it rewards a steady hand and a pin vise for control. The record does not specify a maximum drilling depth or recommended speed, so start with scrap material to gauge feed and pressure.

When the #71 is the better choice

The #71 gives you a slightly larger hole and may be more tolerant of minor misalignment in soft materials. It is listed for wood, plastic, acrylic, resin, PVC, beads, and other soft materials, and the record notes compatibility with hand drills and rotary tools in addition to pin vises. If you need a bit that works across a range of small craft tasks without being as delicate as the #76, the #71 is a practical middle ground. Again, the record does not provide speed or feed settings, so test first.

Pin vise compatibility and handling

Both bits fit the same Excel pin vises (70003, 70005, 70011, 70023, and 55661), so if you already own one of those handles, either set will work. The #71 record also mentions compatibility with other rotary tools, which may give you more flexibility if you use a rotary tool for drilling. Keep the protective plastic tube for storage; it reduces the chance of bending or dulling these small bits. Both products carry a California Prop 65 warning for dust, so wear appropriate protection when drilling.

A practical way to decide

  • Match the hole to the task: If your project calls for a hole near 0.457 mm (0.018 in), pick #76. For a hole near 0.660 mm (0.0260 in), pick #71.
  • Check your material: Both bits list similar soft materials, but #76 explicitly includes walnut and amber. If your material is not listed, test on scrap first.
  • Confirm your tool: Both fit the listed pin vises; #71 also lists compatibility with hand drills and rotary tools.
  • Plan for spares: Each set includes 12 bits in a tube, so you have backups for fine work.

Related Articles

Customer Service
Home
Products
Cart
Profile